母带效果器Initial Audio Master Suite v1.0.0 WiN MacOSX
使用Master Suite,母带制作就像1-2-3一样容易。只需调节响度,并使用3频段均衡器和立体声图像控件来最终确定音轨。向客户,唱片公司,在线商店和流媒体服务发送歌曲和乐器时,要求它们具有行业标准的响度,以便获得最先进的声音。 LUFS显示屏通过变为绿色来指示行业标准的响度,并在您开始变得太大声时警告您。一种智能算法可以应用适量的限制和压缩,可以通过软化和混合来控制。 HD界面看上去干净,感觉很棒,并且可以无缝调整其大小以匹配您的屏幕分辨率。
掌握插件功能
THD:总谐波失真,这可以“肥胖”的主人和帮助增加感知响度。
响度:增加或减少你的主人的响度分贝。使用智能压缩和限制算法,以确保最大的响度与最小的失真。
LUFS表:LUFS表(相对于全规模的响度单位)是一种行业标准表示感知响度。当音量在“甜蜜”区时,在没有过度压缩混音动态的情况下,音标会变绿。
软化:软化压缩曲线,也被称为“软膝盖”。
混合:混合压缩音频与原始。如果你用力按压响度,主音箱听起来过于压缩而失去动力,这个控制可以帮助你在保持主音箱音量的同时恢复一些动力。
模拟:改变主套件的频率响应,以听起来更模拟。
3频段均衡器:将低、中、高频率切断或提升至6dB。
立体声图像:单声道控制工作,使音频完全单声道低于设定的频率。这可以帮助收紧低端,并确保它只来自立体场的中心。立体声控制增强立体声场的频率仅高于中频范围,留下较低的频率未触及。这可以用来增加额外的“空间”在主控通过推动乐器更广泛的立体声领域。
上限:设置峰值的最大响度。您的总线输出不会比这大声。
With Master Suite mastering becomes as easy as 1-2-3. Simply adjust the loudness and finalize your track with the 3 band equalizer and stereo image controls. Sending out Songs and Instrumentals to clients, record labels, online stores and streaming services requires them to have a industry standard loudness in order to have a state of the art sound. The LUFS display indicates a industry standard loudness by turning green and warns you when you start getting too loud. An intelligent algorithm applies the right amount of limiting and compression which can be controlled with soften and mix. The HD interface looks clean, feels great and can be seamlessly resized to match your screen resolution.
Mastering Plugin Features
THD: Total Harmonic Distortion, this can ‘fatten’ up the master and help increase the perceived loudness.
Loudness: Increase or decrease the loudness of your master in decibels. Uses an intelligent compression and limiting algorithm to ensure maximum loudness with minimal distortion.
LUFS Meter: The LUFS meter ( Loudness Units relative to Full Scale) is an industry standard representation of perceived loudness. The meter goes green when in the ‘sweet’ zone of a loud master without over compressing the dynamics of your mix.
Soften: This softens the compression curve, also known as a ‘soft knee’.
Mix: Mix the compressed audio with the original. If you are pushing the loudness hard and the master is sounding over compressed with a loss of dynamics, this control can help restore some dynamics while still keeping the master loud.
Analog: Changes the frequency response of master suite to sound more Analog.
3 Band Equalizer: Cut or boost the low, mid and high frequencies by up to 6dB.
Stereo Image: The Mono control works by making the audio completely mono below the set frequency. This can help to tighten up the low end and ensure it is coming only from the center of the stereo field. The Stereo control enhances the stereo field for the frequencies only above the mid range, leaving the lower frequencies untouched. This can be used to add extra ‘space’ in the master by pushing instruments even wider in the stereo field.
Ceiling: Sets the maximum loudness for peaks. Your master will not go louder than this.
What’s New:
Updates: official site does not provide any info about changes in this version.
Home Page – https://initialaudio.com/product/mastering-plugin-master-suite/